Stainless Sign Bracket Hardware - Stainless Street Sign Brackets
100 % Made In USA
PermaBand American made stainless steel sign brackets are used to mount signs of all kinds , security devices, control boxes, banners / holiday decorations, and enclosures. The stainless brackets are manufactured from American made 201/300 series stainless steel and produced in the USA. The stainless brackets are ribbed to provide additional strength to withstand high winds and heavy loads. A pre-threaded 5/16 x 18 hole is in the center of the bracket to accept 3/4 x 5/16 x 18 stainless bolts. PermaBand carries standard hex head bolts and Allen or Torex tamper proof bolts. Plastic washers are also available to protect the sign finish.
Flare leg brackets can be used with round poles greater than 3” in diameter. Straight leg brackets are used on square poles or poles with diameter larger than 14”. Stainless banding is threaded through the two slots and secured around pole with stainless buckles or stainless wing seals. Depending on the load present, .030, .025 or .020 stainless banding may be used.
Flare leg brackets can be used with round poles greater than 3” in diameter. Straight leg brackets are used on square poles or poles with diameter larger than 14”. Stainless banding is threaded through the two slots and secured around pole with stainless buckles or stainless wing seals. Depending on the load present, .030, .025 or .020 stainless banding may be used.
Straight Leg Brackets
Straight leg brackets are used on square poles or poles with diameters larger than 14”.
|
Flared Leg Brackets
Flared leg brackets can be used with round poles with diameters larger than 3”.
|
Stainless Steel Bolts
PermaBand carries standard hex head stainless bolts and Allen or Torex tamper proof bolts.
|
Protective Plastic
|
