Straight Leg Sign Brackets
Stainless Steel Straight Leg Brackets - Street Sign Brackets
Permaband American made stainless steel sign brackets are used to mount signs, security devices, control boxes and enclosures. The brackets are manufactured from American made 201/300 series stainless steel and produced in the USA. The stainless brackets are ribbed to provide additional strength to withstand high winds and heavy loads. A Pre-threaded 5/16 x 18 hole is in the center of the stainless bracket to accept ¾ x 5/16 x 18 stainless bolts. Permaband carries standard stainless hex head bolts and Allen or Torex tamper proof bolts. Plastic washers are also available to protect the sign finish.
Flare leg brackets can be used with round poles greater than 3” in diameter. Straight leg brackets are used on square poles or poles with diameter larger than 14”. ¾” stainless banding is threaded through the two slots and secured around pole with stainless buckles or wing seals. Brackets are available with or without stainless hex head bolts.
ALL BANDING, BUCKLES, WING CLIPS, AND SIGN BRACKETS ARE 100% MADE IN USA
Flare Leg Bracket for round poles greater than 3" in diameter.
Straight Leg Bracket for square poles and round poles greater than 14" in diameter.
Flare leg brackets can be used with round poles greater than 3” in diameter. Straight leg brackets are used on square poles or poles with diameter larger than 14”. ¾” stainless banding is threaded through the two slots and secured around pole with stainless buckles or wing seals. Brackets are available with or without stainless hex head bolts.
ALL BANDING, BUCKLES, WING CLIPS, AND SIGN BRACKETS ARE 100% MADE IN USA
Flare Leg Bracket for round poles greater than 3" in diameter.
Straight Leg Bracket for square poles and round poles greater than 14" in diameter.
50 per Box - Straight leg bracket with SS Bolt & Washer
PMB001 Stainless Steel Bracket with SS Bolt & Washer 7.3 lbs.
DISTRIBUTORS WELCOME! CALL or FILL OUT THE FORM FOR A FREE SAMPLE 50 per Box - Straight leg - Sign Bracket only
PMB004 Stainless Steel Bracket only 5.9 lbs.
DISTRIBUTORS WELCOME! CALL or FILL OUT THE FORM FOR A FREE SAMPLE 100 per Box - Straight leg bracket with SS Bolt & Washer
PMB001C Stainless Steel Bracket with SS Bolt & Washer 14.6 lbs
DISTRIBUTORS WELCOME! CALL or FILL OUT THE FORM FOR A FREE SAMPLE 100 per Box - Straight leg - Sign Bracket only
PMB004C Stainless Steel bracket only 11.8 lbs.
DISTRIBUTORS WELCOME! CALL or FILL OUT THE FORM FOR A FREE SAMPLE |
COMPANY CATALOG |
|
|
Stainless Straight Leg Sign Brackets
Stainless Steel Street Sign Brackets are available for mounting signs
using Heavy Duty .030" thick type 201 stainless steel banding or light duty band depending on
the load. These sign brackets are commonly used for mounting street signs, traffic signs, security devices, control boxes and enclosures. The stainless mounting brackets
come with or without stainless steel bolts and plastic washers in 50 or
100 piece boxes. Stainless brackets are available in flared and straight leg
styles. Flare leg brackets can be used with round poles greater than 3”
in diameter. Straight leg brackets are used on square poles or poles
with diameter larger than 14”. Stainless banding is threaded through the two slots and secured around pole with stainless buckles or wing seals. Depending on the load present, .030", .025" or .020" Stainless banding may be used. 3/4" long stainless bolts, (Hex Head, Torex anti-theft and Allen Anti-theft) thread into the stainless sign brackets. White Plastic washers protect the sign finish from the bolt.
|